How to Replace a Garage Door Spring?

One of the crucial components that are significantly involved in the process of the door moving up and down is the garage door springs. With time, these springs may weaken or snap, necessitating replacement to maintain the performance and safety of your garage door system. The garage spring replacement cost is not much but only requires some effort.

The process of replacing a garage door spring only requires appropriate equipment and skill and this job can be done successfully. This article presents the detailed procedure for replacing the garage door spring with maintenance tips to help it last for a long time.

A Guide On How To Replace A Garage Door Spring

Following is a detailed step-by-step guide on how to easily and successfully replace a garage door spring:

1. Safety First

Before you start to replace the garage door spring, make sure of your safety by cutting the power off of the garage door opener and securing the door in the fully open position by using locking pliers or vice grips.

2. Classify the Spring Type

Springs are classified into two sorts for garage door systems, one is called a torsion springsand the other is called extension springs. Figuring out the kind of springs in your garage door is very important since the very procedure of replacement could differ greatly due to the type of your garage door spring system.

3. Tools and Supplies

To change out the garage door spring, you will require some particular set of tools and materials such as

  • Winding bars
  • Vise-gripe or locking pliers
  • Socket wrench set
  • Safety goggles
  • Spring new that matches the right dimension and type

4. Lose tension and take out the old spring

To remove a torsion spring, put winding bars and untwist the spring until it has lost its tension. Follow the manufacturer’s instructions to avoid injury. It is advisable to do this step with the help of another person.

When the tension is removed, safely remove the old spring from the torsion tube or spring anchor brackets. Take care to prevent the spring from snapping out quickly and causing damage.

5. Install the New Spring

Install the new spring by performing the same steps in reverse that were used to remove the old one. The spring should be positioned correctly and attached to the torsion tube or anchor brackets as directed. Ensure that it is secured consequently.

6. Twist the New Spring

Use the winding bars to wind the new torsion spring, while still applying the tension that corresponds to the size and weight of the garage door. There is no rush, but the turn system has to be carefully followed to avoid accidents.

7. Test the Door

Take off the locking pliers or vice grip from the door when the new spring is installed and tensioned and test its operation. Do the test by opening and closing the door several more times to check if it moves evenly and smoothly. Make sure no weird noises are coming from the door.

Garage Door Maintenance And Upkeep

Maintenance of garage doors is conducted on a regular basis and includes inspection of the hardware for signs of wear and damage, lubricating of moving parts to prevent friction and therefore rust, and checking the balance of the door to avoid strain on the motor and tracks. Moreover, washing the outside of the door and weather-stripping ensures that the door maintains its look and prevents drafts and moisture from getting inside.


The task of the replacement of the garage door spring is very dangerous and should be done very carefully in accordance with all the safety recommendations. If you follow this step-by-step guide and pay attention all through the process, you will be able to replace a garage door spring and possibly put the door system in operation as before.



Herbert is a technology enthusiast who loves to share his findings on his blog. He is always exploring the latest gadgets and software, and he enjoys helping others learn about new technology trends. Aaron has been involved in technology for many years, and he is passionate about sharing his knowledge with others.

Press ESC to close